I went to work on the rear fender and the second front fender. I had already put a coat of clear on them after I sanded with the 320 so I went with the 600 grit and sanded them down.
I found my next project... 1987 Honda CR125, you can follow along on this site and feel free to comment as things progress.
Monday, March 19, 2012
Plastic Restore part 2
I know in these pictures it may be a little hard to see the scratches that I can see with it right in front of me and with the light just right, but I'm just going to pretend that you can see what I am seeing and post them anyway.


I went to work on the rear fender and the second front fender. I had already put a coat of clear on them after I sanded with the 320 so I went with the 600 grit and sanded them down.
The Finished product looks pretty nice, the front fenders (both the ones that I did) turned out very nice, the Rear on had some deep scars and I decided it was good enough for now and I will probably look for a replacement.
I went to work on the rear fender and the second front fender. I had already put a coat of clear on them after I sanded with the 320 so I went with the 600 grit and sanded them down.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment